Table of Contents
Advertisement
Redback® A 6500 Programming Guide
We select Removable Disk (J) and then OK.
The default configuration should load and display as shown in figure 2.2.
Notice that the simulation of the screen (under the text "Your Plate") displays exactly what is displayed when the A 6500 is
powered up.
As this configuration is only used for testing we won't go into more detail.
3.0 CREATE A NEW CONFIGURATION
Navigate to the "File" tab and then select "New". The window shown below in figure 3.1 should appear.
Once again it is recommended (if not done previously) that a copy is made of the default contents of the Micro SD Card
before a new configuration is saved.
6
Redback® Proudly Made In Australia
Fig 2.2
Fig 3.1
www.altronics.com.au
Advertisement
Table of Contents
