Table of Contents
Advertisement
Redback® A 6500 Programming Guide
The second action for our example is to stop the DVD playing. We click on the lower Play icon and change this to the Stop
icon. We then double click on the command line and change the command to the IR Pronto HEX command used in sec-
tion 15.3 to stop playing the DVD. The button label is renamed to DVD and the result is shown in figure 16.2.
Use the simulate button to check the results when the Play/Stop button is pressed, which are shown in figure 16.3.
As in single button configurations, both actions can have multiple command lines.
24
Redback® Proudly Made In Australia
Fig 16.2
Fig 16.3
www.altronics.com.au
Advertisement
Table of Contents
