Table of Contents
Advertisement
Redback® A 6500 Programming Guide
Once pressed the "Create Pronto HEX Command" window will appear (refer to figure 15.7).
From here it is simply a matter of copying the HEX codes from a webpage or other document and pasting them into the
window. For our example we changed the Icon of button 3 to a Stop Icon available from the icon library. We have then
copied the Pronto HEX codes from a webpage. We name the command Sony DVD Stop. The result is shown in figure
15.8.
(Note: When entering IR PRONTO HEX codes, spaces are valid between each HEX code but invalid at the start and end of
the group. Make sure there isn't a space at the end of the group of codes).
The Pronto HEX code is now listed in the IR Code drop down box as shown in figure 15.9. Select Sony DVD Stop and then
press OK.
The resultant command line now appears in the button actions window as shown in figure 15.10
22
Redback® Proudly Made In Australia
Fig 15.7
Fig 15.8
Fig 15.9
www.altronics.com.au
Advertisement
Table of Contents
