Subscribe to Our Youtube Channel
Related Manuals for Schmidt SS 20.600 Ex
Summary of Contents for Schmidt SS 20.600 Ex
- Page 1 ® SCHMIDT Flow Sensor SS 20.600 Ex - Supplementary instructions for use in explosive atmospheres ATEX...
-
Page 2: Table Of Contents
Type plate ..................11 Declaration of conformity ............... 12 Type Examination Certificate ............13 Imprint: Copyright 2016 SCHMIDT Technology All rights reserved Version: 535698.02A Subject to modifications SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 2... -
Page 3: Important Information
Non-observance of these instructions may lead to injury of the personnel or malfunction of the device. Risk of explosion - read carefully! Important instructions for use in areas subject to explosion haz- ards. SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 3... -
Page 4: Storage And Transport
Before transport or shipment of the sensor, the delivered protective must be placed onto the sensor tip. The storage temperature must not be lower than -20 °C or higher than +85 °C. SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 4... -
Page 5: Safety Instructions For Explosive Atmospheres
TRBS series Standards for explosive gas atmospheres ("G"): EN 60079-10: Classification of explosive atmospheres EN 60079-14: Electrical apparatus for explosive atmospheres EN 60079-17: Inspection and maintenance SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 5... -
Page 6: Application Range
-20 ... +70 °C Sensor: -40 ... +120 °C (depending on the version) More technical data are given in the general "Instructions for use SS 20.600" (material no.: 535084.02). SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 6... -
Page 7: Mounting Instructions
In general the following applies to grounding: The external ground connection on the enclosure must be connected to the equipotential bonding of the hazardous ar- ea with low resistance. SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 7... - Page 8 The screw must be tightened firmly at the terminal so that the conductor cannot be loosened or twisted. Figure 5-1 Grounding contacts (red), remote version Figure 5-2 Grounding contacts (red), compact sensor SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 8...
-
Page 9: Electrical Connection And Protective Sleeve Assembly
(1 x M12) included in the delivery (for assembly procedure refer to Figure 6-1). Protective sleeve for plug-in connector Must be mounted! If the protective sleeve is not mounted properly, the explosion protection is not available! SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 9... - Page 10 Cable bushing Protective sleeve Sensor plug Fastening screw of pro- tective sleeve Nut of cable bushing Figure 6-1 Assembly of the connecting cable with protective sleeve SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 10...
-
Page 11: Type Plate
Attaching on the adjacent wall next to the sensor or similar according to EN 60079-0, chapter 29.6. The side with the warning note "Do not disconnect under voltage" must remain visible. SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 11... -
Page 12: Declaration Of Conformity
8 Declaration of conformity SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 12... -
Page 13: Type Examination Certificate
9 Type Examination Certificate SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 13... - Page 14 SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 14...
- Page 15 SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 15...
- Page 16 SCHMIDT Technology GmbH Feldbergstrasse 1 78112 St. Georgen Germany Phone +49 (0)7724 / 899-0 +49 (0)7724 / 899-101 Email sensors@schmidttechnology.de www.schmidt-sensors.com SS 20.600 Ex – Supplementary instructions for use in explosive atmospheres ATEX Page 16...
Need help?
Do you have a question about the SS 20.600 Ex and is the answer not in the manual?
Questions and answers