Speaker System Hookups - Sony STR-435 Operating Instructions Manual

VCR
Receiver
VIDEO OUT VIDEO IN
L
R
AUDIO OUT AUDIO IN
V I D E O
Use the function buttons (TV/SAT (TV/LD), CD, MD/
TAPE etc.) to select the VIDEO AUDIO OUT signal.
You can record this audio signal by connecting a
recording component such as a cassette deck (to the
VIDEO AUDIO OUT jack).
DVD player/AC-3 decoder
What cables will I need?
• Audio cable (not supplied) (1 for each 5.1 CH/DVD
FRONT and REAR jacks)
White (L)
Red (R)
• Monaural audio cable (not supplied) (1 for each 5.1 CH/
DVD CENTER and WOOFER jacks)
Black
• Video cable (not supplied) (1 for the 5.1 CH/DVD VIDEO
IN jack)
Yellow
You can play decoded Dolby Digital AC-3
soundtracks through the speakers connected to the
amplifier.
If you have a Dolby Digital AC-3 decoder you can
amplify a decoded Dolby Digital AC-3 soundtrack with
the following connections.
Receiver
5 . 1 C H / D V D
FRONT REAR CENTER
L
R
WOOFER VIDEO IN
Where do I go next?
Go on to the next section to connect the speakers.
VCR
OUTPUT INPUT
VIDEO VIDEO
AUDIO AUDIO
L
R
White (L)
Red (R)
Black
Yellow
Dolby Digital AC-3
decoder, etc.
PRE OUT
CENTER REAR FRONT
VIDEO WOOFER

Speaker System Hookups

Overview
This section describes how to connect your speakers to
the receiver. To enjoy surround effects, center and rear
speakers and an active woofer are required. For
specific locations of the terminals, see the illustration
below:
SPEAKERS
WOOFER REAR
IMPEDANCE SPEAKERS
SELECTOR FRONT B
What cords will I need?
Speaker cord (not supplied) (1 for each speaker)
(+)
(–)
Twist the stripped ends of the cord about 2/3 inch (15 mm).
Be sure to match the speaker cord to the appropriate
terminal on the components: + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack bass.
Hookups
Front speakers
Front speaker
Receiver
(R)
FRONT
R
A
B
R
Getting Started
SPEAKERS CENTER
SPEAKERS
FRONT A
(+)
(–)
Front speaker
(L)
L
A
B
L
(continued)
7 US