Speaker System Hookups; Notes - Sony STR-DA80ES Operating Instructions Manual

z
You can display the operating status of the
component connected to the S-LINK CTRL A1 jack
(USA and Canadian models only)
1 Press SET UP repeatedly to select OTHER SETUP.
2 Use the digital processing control buttons ( V / v ) to
select CONTROL-A1.
3 Use the digital processing control buttons ( B / b ) to
select the setting you want by referring to the
following table.
To
Display "PLAY," "STOP," "PAUSE,"
or "REC" for about 8 seconds when
the operation switches
Display "PLAY," "STOP," "PAUSE,"
"REC," or the contents of a disc or
track memo of a CD or MD whenever
you press the DISPLAY button
Turn off the operation status display

Notes

• This setting is effective only when the receiver is set
to TAPE, DAT/MD, VIDEO 2, or CD (see page 13).
For VIDEO 2, the CD changer command mode must
be "CD 2" and the CD changer must be connected to
the VIDEO 2 jacks on the receiver. For CD, the CD
changer command mode must be "CD 1" and the CD
changer must be connected to the CD jacks on the
receiver.
• If the disc or track memo contains a character that the
receiver cannot display, "." appears for that character.
• When the Mega Control function of the CD player is
active, the operating status of the main player is
displayed.

Speaker System Hookups

Overview
This section describes how to connect your speakers to
the receiver. Although front (left and right) speakers
are required, center and rear speakers are optional.
Adding center and rear speakers will enhance the
Select
surround effects. Connecting an active woofer will
AUTO
increase bass response.
IMPEDANCE SELECTOR
FIX
ANTENNA
LD
DVD
AC-3 RF IN
LD
DVD
COAXIAL IN
COAXIAL
LD
DVD
OPTICAL IN
TV
DBS
OPTICAL IN
OFF
CD
OPTICAL IN
DAT
MD
y
OPTICAL IN
DAT
L
MD
OPTICAL OUT
SIGNAL
GND
R
DIGITAL
What cords will I need?
Speaker cord (not supplied) (1 for each speaker)
(+)
(–)
Twist the stripped ends of the cord about 2/3 inch (15 mm).
Be sure to match the speaker cord to the appropriate
terminal on the components: + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack bass.
Hookups
Front speakers
Front speaker
(R)
} ]
Getting Started
Getting Started
FRONT SPEAKERS A
TV / DBS LD / DVD VIDEO 2 VIDEO 1 MONITOR
S-LINK
S VIDEO S VIDEO S VIDEO S VIDEO S VIDEO S VIDEO S VIDEO
IN IN OUT IN OUT IN OUT CTRL A1
IN
R
+
FM
VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO OUT IMPEDANCE
75Ω
IN IN OUT IN OUT IN SELECTOR
4 Ω 8 Ω –
AM
AUDIO AUDIO AUDIO AUDIO AUDIO AUDIO
IN IN OUT IN OUT IN
L
y
CENTER SPEAKER
R
PRE OUT
PHONO CD DAT / MD TAPE
FRONT REAR
CENTER
L L
WOOFER
R R
IN IN REC OUT IN REC OUT IN
IMPEDANCE USE 4–16 Ω
PRE OUT CENTER
SPEAKER
Receiver
FRONT SPEAKERS
IMPEDANCE USE 4–16 Ω
R B L R A L
+ +
– –
FRONT SPEAKERS
IMPEDANCE USE 4–16 Ω
B L R A L
AC OUTLET
+ AC 120V 60Hz
SWITCHED 120W / 1A MAX
–
REAR SPEAKERS
R L
+ +
– –
IMPEDANCE USE 4–16 Ω
REAR
SPEAKERS
(+)
(–)
Front speaker
(L)
} ]
(Continued)
7