Locating A Specific Track - Sony SCD-1 Operating Instructions (primary manual) Operating Instructions Manual

Displaying the information of a TEXT disc
in other languages
You can change the displayed language if the TEXT disc
has multi language capacity. When the player detects such
a TEXT disc, "TEXT" and "MULTI" appear in the display.
Change the language according to the procedures below.
1
Press LANGUAGE in stop mode.
The current selected language (English, French,
German, etc.) flashes.
If the player cannot display the language memorized
in a TEXT disc, "Other Lang" appears in the display.
2
Press LANGUAGE repeatedly until the desired
language appears in the display.
3
Press TEXT/ENTER.
The information appears in the selected language.
Notes
• If your TEXT disc memorized in one language, the name of that
language appears for a few seconds in the display when you
press LANGUAGE.
• When you press LANGUAGE while playing a TEXT disc, the
name of the current selected language appears for a few
seconds in the display.

Locating a Specific Track

During stop or play mode, you can locate any track to be
played.
ER AUTO CD CD
MANUAL SELECTOR
l/L
To go to
The next track (AMS*)
A preceding track (AMS*)
The beginning of the current
track (AMS*)
Automatic Music Sensor
*
Locating a track directly by entering the
track number Z
Press the number button(s) to enter the track number.
z
To enter a track number over 11 Z
1
Press >10.
2
Enter the corresponding digits.
To enter 0, press 10/0 instead.
Examples:
• To play track number 30, press >10, then 3 and 10/0.
• To play track number 100, press >10 twice, then 1, and 10/0
twice.
z
If you enter a track number while the player is paused
You cannot locate a track in pause mode. The player will still
remain paused.
Number
buttons
>10
./>
Do the following:
Press L
Press l repeatedly
Press l during play
15
GB