Product Information; Introduction; Description - Cooper Kyle Form 4C Installation Instructions Manual

Recloser control front panel replacement kit kme4-701
Hide thumbs Also See for Kyle Form 4C:
Table of Contents

Advertisement

SAFETY
FOR LIFE

Introduction

Service Information S280-77-13 provides instructions for
replacing the front panel of the Form 4C Recloser
Control. Before installing this kit, carefully read and
understand the contents of this manual.

Description

The kit includes the parts necessary to replace the front
panel of the Form 4C control.
Review ALL steps in this publication before installing the
enclosed kit. In addition, refer to the included Form 4C
Service Information S280-77-1 before the control is placed
back into service. Service Information S280-77-1 provides
control operation, maintenance instructions and testing
TABLE 1
Kit KME4-701 Parts
Qty.
Catalog Number
1
S280-77-13
1
S280-77-1
1
S280-77-4
1
KME40003000001
1
KME4000203
1
KA20720001
3
KA20060020
4
KA20200028
1
KME4-1235
1
KME4-1110
1
KME4-1133
5
KA23580007
4
KA23580008
1
KME4-1214
1
KA20060001
1
KA20060008
1
KA20200005
Trip Test
Accessory
Figure 2.
Identification of various part locations on Form 4C controls.

PRODUCT INFORMATION

Description
Kit Installation Instructions
Form 4C Installation/Operation Manual
Form 4C Programming Guide
Form 4C Control Panel Assembly
Connector Cable Assembly (Option I/O)
18" length of Plastic Spiral Cable Wrap
Plastic Cable Clamps
Elastic Stop Nut
Accessory Label (See Figure 3)
Cabinet Door Revision Label (See Figure 3)
Optional I/O Label (See Figure 3)
Ty-Wraps
Ty-Wraps
Malfunction Code Label (See Figure 3)
Cable Clip
Cable Clip
Elastic Stop Nut
Plastic Cable Clamp
Connector Cable Assembly
(Optional I/O)
Groundwire and #8
Nut and Lockwasher
Tie Wraps
P4
Plastic Spiral
Elastic Stop Nuts
Form 4C Control
Cable Wrap
Panel Assembly
KME4-148
procedures for Form 4C Microprocessor-Based Recloser
Control.
The parts included in the Form 4C Front Panel Kit are list-
ed in Table 1.
For installation of the kit, the following tools are required.
• Kyle Type MET Electronic Recloser Tester or equivalent.
• 5/16" wrench
• 11/32" wrench
• A standard screwdriver
Note: Routing of the panel harness may differ from the origi-
nal routing.
Note: The view may differ slightly for different revisions of
Form 4C controls.
Fiber-Optic Digital
Battery Connector
Communications Accessory
P2
P15
P19
P6
P7
Control Cable
Door-Stop Link
Receptacle
S280-77-13
P12
P8
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents