1
3
1. Tank-filler cap
2. Suction strainer
Checking the Hydraulic-Fluid
Overheat Warning System
Service Interval: Every 500 hours
1. Temperature switch
1. Turn the ignition key to the
2. Disconnect the red/yellow wire terminal from the
hydraulic tank temperature switch.
3. Touch the metal terminal of the wire onto a suitable
earth point, ensuring that the metal surfaces make
good contact.
The horn will sound and the
hydraulic-fluid-temperature-warning light will illuminate to
confirm correct operation. If necessary, make repairs before
operating the mower.
2
G014452
Figure 50
3. Filler strainer
1
2
g018024
Figure 51
2. Hydraulic-oil tank
position (I).
ON
Checking the Hydraulic Lines
and Hoses
Daily, check hydraulic lines and hoses for leaks, kinked
lines, loose mounting supports, wear, loose fittings, weather
deterioration, and chemical deterioration. Make all necessary
repairs before operating the machine.
g014452
g018024
44