Check The Hydraulic Oil Overheat Warning System; Checking The Hydraulic Lines And Hoses - Toro 30651 Operator's Manual

1
3
1. Oil tank filler cap
2. Suction strainer
Check the Hydraulic Oil
Overheat Warning System
Service Interval: Every 500 hours
1. Temperature switch
1. Turn the ignition key to the ignition on position I.
2. Disconnect the Red/Yellow wire terminal from the
hydraulic tank temperature switch.
3. Touch the metal terminal of the wire onto a suitable
earth point, ensuring that the metal surfaces make
good contact.
The horn will sound and the hydraulic oil temperature
warning light will illuminate to confirm correct
operation. If necessary, make repairs before operating
the mower.
2
G014452
Figure 51
3. Filler strainer
1 2
g018024
Figure 52
2. Hydraulic oil tank
Checking the Hydraulic Lines
and Hoses
Daily, check hydraulic lines and hoses for leaks, kinked
lines, loose mounting supports, wear, loose fittings,
weather deterioration, and chemical deterioration. Make
all necessary repairs before operating.
45