Toro Groundsmaster 3400 Operator's Manual page 13

Ignition Key
0 = Engine off
I = Engine run/Auxiliary on
II = Engine pre-heat
III = Engine start
CAUTION
If you leave the key in the ignition switch, someone
could accidently start the engine and seriously
injure you or other bystanders.
Lower the cutting units to the ground, engage the
parking brake and remove the key from the ignition
switch before servicing or making adjustments to
the machine.
1
I
II
III
Figure 14
1. Ignition switch
Engine Pre-Heat Indicator Light
Turn the ignition key to position II. The engine pre-heat
indicator light illuminates and heats the glow plugs
15).
Important: Attempting to start a cold engine before
using the pre-heat can cause unnecessary wear to the
battery.
1. Engine pre-heat indicator light
Fuel Gauge
The fuel gauge shows the amount of fuel in the tank
16).
G018082
g018082
13
1
Figure 15
FUEL
E
F
G014558
Figure 16
(Figure
G018083
g018083
(Figure
g014558