Toro Groundsmaster 3400 Operator's Manual page 39

5. Clean the screen thoroughly with compressed air.
6. Pivot the latch inward to release the oil cooler
42).
Figure 42
1. Oil cooler
7. Working from the fan side of the radiator, blow out
debris with low pressure 344 kPa (50 psi) compressed
air (do not use water).
Note: Repeat this step from the front of the radiator
and again from the fan side.
8. Thoroughly clean both sides of the oil cooler. After the
radiator and oil coolers are thoroughly cleaned, clean
out any debris that may have collected on other parts
of the machine (Figure
(Figure
G014918
2. Oil-cooler latch
43) with compressed air.
1. Radiator
g014918
9. Pivot the oil cooler back into position and secure the
latch.
10. Close the engine cover and secure the latch.
39
G014919
Figure 43
g014919