Mantis ComposTumbler Assembly Instructions Manual page 11

Completion
Completion
STEP 7:
Placement of Drum
on Support Frame
A. Check the Support Frame to make sure
that all four drive wheels are pulled out
against the flanges on the axle rod carriers
and that the spring pins are all snugly
fitted into the slots in the wheel hubs.
B. Place the drum on the Support Frame so
that when the door opening is positioned
on the same side of the Frame as the drive
wheel handle, the latches are on the
bottom of the opening and the latch
brackets are on top.
C. Adjust the position of the drum so that it
is centered and resting evenly on all four
drive wheels. The ridged edges of the
endcaps should be sitting firmly on the
gear sections of the wheel drives.
Your ComposTumbler is now completely assembled and ready to use. Read your
operating instructions manual, "How to Make Superior Compost," carefully
before starting your first batch of compost.
11