Dubbing A Tape Manually; Dubbing The Whole Tape - Aiwa NSX-AJ80 Operating Instructions Manual

DUBBING A TAPE MANUALLY

• Set the tape to the point where recording will start.
• The reverse mode is automatically set to p.
Note that recording will be done on one side of the tape only.
1 Press TAPE/DECK 1/2.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded
on facing out from the unit.
3 Press TAPE/DECK 1/2 to select deck 1.
"TP 1" is displayed.
4 Press w REC/REC MUTE to start recording.
Playing and recording start simultaneously.
To stop dubbing
Press s.
18
ENGLISH

DUBBING THE WHOLE TAPE

This function allows you to make exact copies of both sides of
the original tape. The reverse side of both tapes will start
simultaneously as soon as the longer tape has been reversed.
• Dubbing does not start from a point halfway in the tape.
• The reverse mode is automatically set to [.
1 Press TAPE/DECK 1/2.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
on facing out from the unit.
3 Press SYNC DUB once or twice to start recording.
1 For recording at normal speed, press it once to display
NORM-DUB.
2 For recording at high speed, press it twice to display
HIGH-DUB.
1
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press s.
Recording does not start if the erasure prevention tab on either
side of the tape is broken off.
2