Chapter Description; Reader Programming Conventions - Welch Allyn SCANTEAM 3000PDF Techical Manual

Pdf417 capable ccd reader

Hide thumbs Also See for SCANTEAM 3000PDF:

Table of Contents

PROGRAMMING THE READER

4.1 Chapter Description

This chapter provides information on the following topics:

SCANTEAM 3000PDF programmable functions

scanner signals and what they mean

how to use the Programming Menus

Note:

For additional information on programming the SCANTEAM

3000PDF CCD reader, refer to the SCANTEAM PDF417

Programming Menu. The Programming Menu is used to select the

various parameters for reader operation discussed below and

includes specific application guidelines for reader programming.

The SCANTEAM 3000PDF Reader is programmed by scanning

bar code symbols included in the SCANTEAM PDF417

Programming Menu. The menus contain the bar code symbols

you scan to:

Enter the programming mode

Select application options

Exit the program mode

As you scan the bar code symbols, the information represented

by the bar code symbols is stored in the reader's non volatile

PEROM memory. If the unit is turned off, the non volatile

PEROM memory retains the programmed application options.

Note:

The SCANTEAM 3000PDF scanner stores configuration parameters

in flash memory. Saving configuration parameters more than 1000

times exceeds the specifications of the flash memory.

Programming the Reader

4–1

Table of Contents