Infortrend EonStor DS S12 Series Hardware Manual page 36

EonStor DS S12/S16/S24 Series Hardware Manual
S16S-R2242-4 6Gb/s + 1Gb/s
S24S-G2240
S24S-G2240-4
iSCSI Host
Model name
S12E-G1140
S12E-R1140-4
S12E-G2140
S12E-R2140
S12E-G2140-4
S16E-G1140
S16E-R1140-4
S16E-G2142
S16E-R2142
S16E-G2240
S16E-R2240
S24E-G2142
The BBU is only charged partially when shipped. Therefore, after powering on the
subsystem the BBU will start charging to its full capacity. It normally requires
approximately twelve hours for the battery to be fully charged. If the battery is not
fully charged after twelve hours, there may be a problem with the BBU and you
should contact your subsystem vendor immediately. You can also check the status of
the battery module via SANWatch or the firmware.
Dual
6Gb/s Single
6Gb/s Single
Speed Controller
1Gb/s Single
1Gb/s Dual
1Gb/s Single
1Gb/s Dual
1Gb/s Single
1Gb/s Single
1Gb/s Dual
1Gb/s Single
1Gb/s Dual
10Gb/s Single
10Gb/s Dual
1Gb/s Single
36
Default Default
Optional Optional
Optional Optional
BBU FBM
Optional Optional
Default Optional
Optional Optional
Default Optional
Optional Optional
Optional Optional
Default Optional
Optional Optional
Default Optional
Optional Optional
Default Optional
Optional Optional