Infortrend EonStor DS S12 Series Hardware Manual page 145

EonStor DS S12/S16/S24 Series Hardware Manual
tray open for an extended period of time or the internal airflow will be disrupted.
Handle the drives with extreme care. Carry them only by the edges of their metal
covers and avoid touching their circuits part and interface connectors.
To replace a hard drive, follow these steps.
1. Identify the drive tray. Use the firmware utility, SANWatch, or the LED on the
drive tray to identify faulty hard drive(s). The drive bays are numbered from left to
right and then from top to bottom.
2. Unlock the drive tray bezel. Use a flat-blade screwdriver to set the groove in the
horizontal orientation.
3. Open the drive tray. Press the button. The spring handle will pop out.
145