Home position
Inserting a document against the outer stop pins
9710
The figure below shows the basic position of the relevant mechanisms. The pressure rolls
(A) and (B) are lifted, and both the outer and inner stop pins (C) are raised.
The application knows which type of document is to be inserted and may have informed the
operator by means of an on-screen message. Alternatively, the operator may have informed
the application, via the keyboard, regarding the type of document he or she is going to
insert.
Figure 2-4 Feed rolls and stop pins in home position
Thin documents, such as forms and vertically folded passbooks, should be inserted against
the outer stop pins, as shown below.
LB12/LB15 Field Support Manual
Figure 2-5 The document being fed in
2-5