Tape - Play; Loading A Tape; Playing A Tape - Sony MHC-RV60 Operating Instructions Manual

Tape – Play

Loading a tape

1
Press TAPE A/B repeatedly to select
deck A or B.
2
Press Z PUSH or PUSH Z on the unit.
3
Load a recorded/recordable tape in
deck A or B with the side you want to
play/record facing forward.
With the side
you want to
play/record
facing
forward.

Playing a tape

You can use TYPE I (normal) tape.
1
Load a tape.
To play both decks in succession, press
PLAY MODE repeatedly until "RELAY"
*1
(Relay Play) appears in the display.
2
Press DIRECTION on the unit
repeatedly to select "g" to play one
side. Select "j"
To play both decks in succession, select
"RELAY" (Relay Play)
3
Press nN.
Press the button again to play the reverse
side. The tape starts playing.
Reverse indicator
Tape presence indicator
*1
Relay Play always follows this cyclic sequence
up to five times, then stops:
Deck A (front side) t Deck A (reverse side)
t Deck B (front side) t Deck B (reverse
side)
*2
The tape deck stops automatically after
repeating the sequence five times.
Other operations
To Do this
Press x.
Stop play
Press X. Press again to resume
Pause
play.
Press m or M.
Fast-forward or
rewind
Z
Remove a tape Press
unit.
*2
to play both sides.
*1
.
Forward indicator
PUSH or PUSH Z on the
continued
GB
21