Listening To The Radio; Preset Tuning; Manual Tuning - Sony MHC-RV60 Operating Instructions Manual

Listening to the radio

You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner's memory first
(see "Presetting radio stations" on page 18).
1
Press TUNER/BAND repeatedly to
select "FM" or "AM".
2
Press PRESET –/+ (or . or > on
the unit) repeatedly to select the
desired preset station.
Preset number
GB
20
Frequency
Listening to non-preset radio
station

— Manual Tuning

1
Press TUNER/BAND repeatedly to
select "FM" or "AM".
2
Press TUNING –/+ (or –m or M+ on
the unit) repeatedly to tune in the
desired station.
Note
When TUNER is selected as the current function and
CD is pressed to select CD during "CD POWER OFF",
it may take some time to switch the function (page 19).
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
FM MODE on the unit repeatedly until "MONO"
appears. There will be no stereo effect, but the
reception will improve.
• Press and hold TUNING –/+ (or –m or M+ on
the unit). The frequency indication changes and
scanning stops when the system tunes in a station
(Automatic Tuning).
• To record the radio programs, use manual recording
(page 23).