Standard Features And Accessories - Carrier 38MGQ Series Service Manual

STANDARD FEATURES AND ACCESSORIES

Ease of Installation
Mounting Bracket
Low Voltage Controls
Comfort Features
Microprocessor Control
Wired Remote Control for High Walls, Cassette and Floor Console
Wired Remote Control for Ducted
Wireless Remote Control
Rapid Cooling and Heating
Automatic Air Sweep
Cold Blow Prevention
Continuous Fan
Auto Restart Function
Auto Changeover
Follow Me
Energy Saving Features
Inverter Driven Compressor
Sleep Mode
24 Hour Stop/Start Timer
46° F Heating Mode (Heating Setback)
Safety And Reliability
Indoor Coil Freeze Protection
3 Minute Time Delay For Compressor
High Compressor Discharge Temperature
Low Voltage Protection
Compressor Overload Protection
Compressor Over Current Protection
IPM Module Protection
Ease of Service
Cleanable Filters
Diagnostic
Error Messages Displayed On Front Panel
Application Flexibility
Condensate Pumps For High Walls and Floor Console
Condensate Pump For Cassette and Ducted
Crankcase Heater
Basepan Heater
Legend
S Standard
A Accessory
INDOOR UNITS
S
S
S
A
S
S
S
S
S
S
S
S
S
Fig. 1 – Condensate Pump Accessory
S
On high wall fan coils, the condensate pump has a lift capability of
S
12 ft. (3.6 m) on the discharge side with the pump mounted in the
S
fan coil or 6 ft (1.8 m) on the suction side if the pump is remote
S
mounted. The pump is recommended when adequate drain line
S pitch cannot be provided, or when the condensate must move up to
S
exit.
S
S
OUTDOOR UNITS
S
S
Crankcase Heater
S
Standard on all unit sizes. Heater clamps around compressor oil
stump.
S
S
S
A
S
S
S
4