Regulator; Condensate Outlets; Control Panel - Atlas Copco GA18 VSD Instruction Book

1.3.1 Elektronikon regulator (E1-Fig. 1.1)
Controlling the compressor
Note:
2920 1454 00
Protecting the compressor
Service plans
Automatic restart after voltage failure
Warning If activated and provided the module was in the
automatic operation mode, the compressor will
automatically restart if the supply voltage to the
module is restored within a programmed time
period.
The power recovery time (the period within which
the voltage must be restored to have an automatic
restart) can be set between 10 and 3600 seconds
or to Infinite. If the power recovery time is set to
Infinite, the compressor will always restart after
a voltage failure, no matter how long it takes to
restore the voltage. A restart delay can also be
programmed, allowing e.g. two compressors to
be restarted one after the other.
1.3.2 Control panel (Figs. 1.1 and 1.7)
LEDs/buttons/keys
Ref. Designation Function