Hookup; Rear Panel Connections And Controls; Inputs; Power - PRESONUS Eris XT Series Owner's Manual

2

Hookup

2.1

Rear Panel Connections and Controls

2 Hookup
2.1 Rear Panel Connections and Controls

Inputs

2.1.1
2.1.2

Power

Line-level Inputs. The Eris XT studio monitors provide a choice of three line-
level input types: balanced XLR, balanced ¼" TRS, and unbalanced RCA. Do not
connect more than one source to your Eris XT studio monitors simultaneously.
Power User Tip: Whenever possible, it is recommended that you utilized the balanced
line-level inputs on your Eris XT studio monitors. Balanced cables and connections are
resistant to induced noise from radio frequencies and electromagnetic interference (RMI
and EMI). If your audio source has only unbalanced connections (either ¼" TS or RCA), it is
recommended that the RCA input be used. ¼" TS-to-RCA cables and adapters are readily
available at most music supply stores. Whether utilizing the balanced or unbalanced
inputs, always use the shortest cable length possible to minimize the risk of induced noise
in your studio monitors.
Input Gain. Sets the level of the input signal before it is amplified.
IEC Power Connection. This is the power inlet for your Eris XT studio monitor.
Warning: Do not remove the center grounding prong or use a ground-
lift adapter, as this could result in electric shock.
Power Switch. This is the On/Off switch for your Eris XT studio monitor. When your
Eris XT studio monitor is powered On, the blue LED on the front panel will illuminate.
Eris XT-Series E5XT / E8XT
Owner's Manual
4