Hookup; Rear Panel Connections And Controls; Inputs; Power - PRESONUS Sceptre CoActual S6 Owner's Manual

2

Hookup

2.1

Rear Panel Connections and Controls

2 Hookup
2.1 Rear Panel Connections and Controls

2.1.1 Inputs

[+]

2.1.2 Power

2 1
Ground
3
[-]
XLR
Input Level: Sets the amount of gain applied to the
input signal. This is not a volume control in the traditional
sense; instead, it sets the level of the input signal before
it is amplified.
IEC Power Connection: Your Sceptre S6/
S8 accepts a standard IEC power cord.
Warning: Do not remove the center grounding prong or
use a ground-lift adapter, as this could result in electric
shock.
Line-level Inputs. The Sceptre S6/S8
provides a choice of two balanced
inputs: XLR and ¼" TRS. These inputs
accept a line-level signal from your
audio source and feed that signal
to the monitor's built-in power
amplifiers. When both balanced
connections are in use, the TRS
input supersedes the XLR input.
Note: Make sure your audio source's
XLR or ¼" TRS wiring corresponds
to that of the Sceptre S6/S8.
Sleeve:
Ground
TRS
Sceptre S6 and S8
™
Owner's Manual
Ring: Tip:
[-] [+]
3