Table of Contents
Advertisement
Salvis Fresh & Smart 1100
8
Errors and possible causes
Check the air circulation components for damage at least twice a year.
If there are any malfunctions, the Fresh & Smart must be separated from power by pulling the CEE power
plug.
Repairs on the Fresh & Smart or the used Smartline units must only be performed by a company
specializing in this type of work.
Caution!
Independent of the respective manufacturer, an intervention into the housing and appliance system
by anyone other than authorised personnel, will lead to immediately invalidity of all warranty
claims.
With malfunctions that are not traceable to contamination or insufficient cleaning, we recommend contacting
your supplier, who will in turn provide you with the address of an authorised specialty company.
Caution!
Only use the respective original manufacturer parts for any repair.
If the connection cable of the Fresh & Smart or the used cooking functions is damaged, the
appliance must not be used any longer and must remain separated from power until the
connection cable is replaced by an original spare part by the manufacturer or an authorised
specialty company.
Malfunction
No power supply
Cooking appliances to not
work
Heavy smoke and odour
generation
Very difficult to move the
appliance
Page 15
Possible cause
Plug connections interrupted
Cable defective
Plug not connected
Appliance defective
Temperatures of cooking
appliances set too high
Filter components blocked
Wheels are locked
SALVIS AG
Solution by / with
User must check the plug connections
Solve through customer service
Insert the plug
Repair by customer service
Reduce the set temperature to a maximum
of 230° C
Clean / replace the filters
Release stops
CH-4665 Oftringen
www.salvis.ch
Advertisement
Table of Contents
