Table of Contents
Advertisement
Salvis Fresh & Smart 1100
5.3
Starting up the Smartline
Make sure that the exhaust channels at the interior front of the adjustment niche are anchored down
properly in the attachments.
®
If using the Smartline
adjustment niche of the suction module.
After that, insert the Smartline
Attention! Danger of crushing!
During the insertion of the cooking appliance, there is a danger of crushing or pinching body
parts. Also make sure, that the power cables of the Smartline
pinched!
Attention! Danger of burns and crushing!
When using cooking and frying appliances, such as deep fryers, there is a danger of burns
from hot surfaces or other injuries. This danger remains after the appliance has been turned
off, as the heated surfaces may take a long time to cool off.
Let the set cooking appliances cool off completely before you begin cleaning and removing
the cooking appliances and the Fresh & Smart.
If you would like to move the Salvis Fresh & Smart to a different location, please remove the
set cooking appliances or prevent them from moving.
Only one deep fryer at a time may be used inside the Fresh & Smart.
The basic filter rules and the basic rules of caring for grease must be adhered to, as the
effectivity degree of the filter system may otherwise be compromised.
Risk of explosion! Risk of burns!
Never pour water into the deep fryer as long as it is filled with grease / oil – no matter if it is
hot or cold.
There must be no water extraction locations or devices with liquid contents, such as double
boilers or water kettles in the vicinity of deep fryers. Here, a minimum distance of 90 cm must
be kept.
Page 10
®
cooking appliance components
cooking appliance components, first adjust the system supports to the
®
cooking appliance into the system support.
SALVIS AG
®
cooking appliances are not
CH-4665 Oftringen
www.salvis.ch
Advertisement
Table of Contents
