Changing The Track Level After Recording (S.f Edit) - Sony MDS-PC3 M-crew Operating Instructions Manual

3
Press YES (or ./> on the deck).
One of the following messages appears
depending on the last edit operation.
Last edit operation
Erasing a track
Erasing all the tracks on
an MD
Erasing a portion of a track
Dividing a track
Combining tracks
Moving a track
Naming a track or MD
Copying a track or disc name
Renaming a track or MD
Erasing a track or disc name
Erasing all the names on the
MD
4
Press YES (or ./> on the deck).
"Complete!!" appears for a few seconds and
the MD is restored to the condition that
existed before the edit operation.
To cancel the operation
Press MENU/NO or x (or x/Z on the deck).
Changing the Track
Level After Recording
Message
(S.F Edit)
You can change the volume of recorded tracks
Erase Undo?
using S.F (Scale Factor) Edit. The original track
is recorded over at the new recording level. When
changing the recording level, you can change the
Divide Undo?
overall level, gradually increase the signal level at
CombineUndo?
the start of the track, or gradually decrease the
Move Undo?
level at the end of the track.
Name Undo?
Changing the overall level of a
track
1
2
3
Z
N X x
./>
z
. >
m M
MENU/NO
While the deck is stopped, playing, or
paused, press MENU/NO.
"Edit Menu" appears in the display.
Press ./> repeatedly (or turn
./> on the deck) until "S.F Edit
?" appears, then press YES (or ./
> on the deck).
Press ./> repeatedly (or turn
./> on the deck) until "Tr Level
?" appears, then press YES (or ./
> on the deck).
?/1
+
YES
–
g
continued
39