Dividing Tracks - Sony MDS-PC3 M-crew Operating Instructions Manual

9
Press YES (or ./> on the deck)
to enter point B.
"Complete!!" appears for a few seconds and
the portion between point A and B is erased.
To cancel the operation
Press MENU/NO or x (or x/Z on the deck).
z
You can undo the erasure
For details, see "Undoing the Last Edit" on page 38.
Note
In the following cases, "Impossible" appears in the
display:
— Point B comes before point A. Reposition point B
so that it comes after point A.
— The tracks can't be combined because repeated
editing has been done to the track(s). This is a
technical limitation of the MD system and is not a
mechanical error.

Dividing Tracks

You can divide a recorded track at any point
simply by adding a track mark at that point. This
is especially useful when you want to divide
recorded material which contains multiple tracks
but only one track number (see page 18), or when
you want to locate a certain point in the track.
Example: Dividing the second
track
AAA BBB
1 2
B1
AAA BBB
1 2 3
B1
When you divide a track, the total number of
tracks increases by one and all tracks following
the divided track are automatically renumbered.
1
While the deck is stopped, playing, or
paused, press MENU/NO.
"Edit Menu" appears in the display.
2
Press ./> repeatedly (or turn
./> on the deck) until "Divide
?" appears, then press YES (or ./
> on the deck).
3
Press ./> repeatedly (or turn
./> on the deck) until the
number of the track you want to divide
flashes, then press YES (or ./>
on the deck).
"-Rehearsal-" appears in the display and the
deck repeatedly plays the first several
seconds of the track starting from the point
where you press YES (or ./> on the
deck).
CCC
3
B2
-
CCC
4
B2
continued
31