Remote Parts Description - Sony MDS-PC3 M-crew Operating Instructions Manual

Remote Parts
Description
qh
qg
EJECT INPUT
qf
6
( P
qd
= +
0 )
qs
MENU/NO NAME EDIT/
SELECT
qa
REPEAT AyB
q; 98 7
1 ?/1 (power) switch (12, 21)
Press to turn the deck on. When you turn the
deck on, the ?/1 switch indicator on the deck
turns off. When you press the switch again, the
deck turns off and the indicator lights up red.
2 PLAY MODE button (24, 25)
Press to select Shuffle Play or Program Play.
3 DISPLAY button (6, 16, 25, 35)
Press to select the information to be displayed in
the window, or to select the type of characters to
be input.
4 MUSIC SYNC button (20)
Press to start Music Synchro-recording.
5 FADER button (42)
Press to perform Fade-in Recording/Playback or
Fade-out Recording/Playback.
6 LEVEL +/– buttons (14, 21)
Press to adjust the recording level and the output
level of the PHONES jack and ANALOG OUT
jacks.
7 YES button (15, 25, 28)
Press to carry out the selected operation.
8 CLEAR button (26, 36)
Press to cancel the selection.
1/u
REC MODE
1
PLAY MODE
2
p
DISPLAY
3
r
FADER MUSIC SYNC
4
5
YES
+
6
LEVEL
CLEAR
–
g
9 AyB button (23)
Press to select Repeat A-B Play.
0 REPEAT button (23)
Press to play tracks repeatedly.
qa NAME EDIT/SELECT button (37)
Press to add the name or change the name of a
track or MD.
qs MENU/NO button (15, 25, 28)
Press to display "Edit Menu" or "Setup Menu."
qd N button (13, 21)
Press to start play or recording.
X button (13, 21)
Press to pause play or recording. Press again to
resume play or recording.
x button (13, 21, 29)
Press to stop play, recording, or cancel the
selected operation.
./> buttons (13, 21, 22, 25, 28)
Press to locate tracks, select a menu item, or
select a character to be input.
z button (13, 17, 18)
Press to record on the MD, monitor the input
signal, or mark track numbers.
m/M buttons (22, 26, 36)
Press to locate a portion within a track, change
the contents of a program, or shift the cursor.
qf EJECT Z button (13, 21)
Press to eject the MD.
qg INPUT button (12)
Press to select the input jack (or connector) of the
program source to be recorded.
qh REC MODE button (15)
Press to select one of the following four
recording modes: Mono (monaural recording),
stereo (stereo recording), LP2 (2 times normal
recording time), and LP4 (4 times normal
recording time).
5