Advertisement
Quick Links
Step4:
Step4:
1.Vertical title
1.Vertical title
Loosen tilt tension screws with supplied Hex Wrench .Adjust display for
desired tilt angle ,and then re-tighten tension screws .As shown in Fig4a .
2.Roll control in little range
2.Roll control in little range
Loosen left and right tension screws with supplied Hex Wrench .Adjust
display for desired angle ,and then re-tighten tension screws .As shown
in Fig4b .
3.Roll control in great range
3.Roll control in great range
Pull the display ,make distance between display and wall is maximum .
Circumvolve display in horizontal direction, adjust it for desired angle .
As shown in Fig4c .
4.Withdraw the display
4.Withdraw the display
fold the Bracket to shorten the distance between display and wall ,let
display cling the wall in vertical direction .
-4-
-4-
Flat Panel Fixed Mount
INSTALLATION GUIDE
：
"
~
TV size rang 10
24
Max load capacity:15Kg/33lbs
According to VESA 75/100 standard
Can tilt and fold the Bracket
Important:
Important: If don't understand about right install ways, please
consult to normal installing specialist.
Item No.:PWLB121
Item No.:PWLB121
"
Advertisement
Related Manuals for Pyle PWLB121
Summary of Contents for Pyle PWLB121
- Page 1 Pull the display ,make distance between display and wall is maximum . INSTALLATION GUIDE Circumvolve display in horizontal direction, adjust it for desired angle . As shown in Fig4c . Item No.:PWLB121 Item No.:PWLB121 4.Withdraw the display 4.Withdraw the display fold the Bracket to shorten the distance between display and wall ,let display cling the wall in vertical direction .
- Page 2 Parts: Parts: Step2 Step2 nfold the Arm Assembly nfold the Arm Assembly Name Use wall mount as templet,let Bracket flex at the position determined before. M4 8mm bolt And making a mark in the center of batten. M5 8mm bolt Note: Note: If mounting to cement and beton wall,making mark on the wall directly.