Step 3: Setting The Time - Sony LBT-LV100AV Operating Instructions Manual

Step 3: Setting the
time
You must set the time before using the timer
functions.
1 2,4
1
Press c/CLOCK SET.
The hour indication flashes.
2
Press TUNING +/– to set the hour.
3
Press ENTER/NEXT.
The minutes indication flashes.
4
Press TUNING +/– to set the
minutes.
5
Press ENTER/NEXT.
The clock starts.
10
3,5
Tip
If you make a mistake, start over from step 1.
To change the time
The previous explanation shows you how to
set the time while the power is off. To change
the time while the power is on, do the
following:
1 Press c/CLOCK SET.
2 Press TUNING +/– to select SET CLOCK.
3 Press ENTER/NEXT.
4 Perform steps 2 through 5 in the previous
explanation.
Note
The clock setting is canceled when you disconnect
the power cord or if a power failure occurs.