Connecting Video Components - Sony LBT-LV100AV Operating Instructions Manual

Connecting an MD deck
for analog recording
Be sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected MD deck, press FUNCTION
repeatedly until "MD" appears. Refer to the
instructions included with your MD deck for
details.
To the audio outputs
of the MD deck
Tip
When you connect a Sony MD deck, you can use the
MD N, X and x buttons on this system's remote to
perform play, pause and stop operation.
Connecting a subwoofer
You can connect an optional subwoofer. Refer
to the instructions included with your
subwoofer for details.
To the input of the subwoofer
To the audio inputs of
the MD deck
Connecting video
components
You can connect a VCR, camcorder, or video
game to the VIDEO 1 jack on the rear panel
and/or the VIDEO2 INPUT jack on the front
panel.
Connecting a VCR
Be sure to match the color of the plugs and the
connectors. To listen to the sound from the
connected VCR, press FUNCTION repeatedly
until "VIDEO 1" appears.
By connecting the audio output jacks of your
VCR to the AUDIO IN jacks using an optional
audio cable, you can enjoy video playback in
powerful stereo sound. Moreover, if you
connect the video input on the VCR to the MD
OUT jacks and VIDEO OUT (or S VIDEO
OUT) jack using the supplied video connecting
cable (or an optional S VIDEO connecting
cable), you can record the audio and video
signals from a VIDEO CD onto video tape.
Refer to the instructions included with your
VCR for details.
To the audio inputs
of the VCR
To the S VIDEO
input of the VCR
Note
The input signal from the VIDEO 1 and VIDEO 2
INPUT jacks do not output via the S VIDEO OUT
jack.
To the audio outputs
of the VCR
To the video output of
the VCR
continued
53