The Display - Sony LBT-LV100AV Operating Instructions Manual

Listening to the radio
(continued)
1
Press TUNER/BAND repeatedly
until the desired band appears in

the display.

Each time you press this button, the
band changes as follows:
FM y AM
2
Press TUNING MODE repeatedly
until "PRESET" appears in the
display.
MANUAL t AUTO t PRESET
3
Press TUNING +/– (or PRESET +/–
on the remote) to tune in the desired
preset station.
Preset number*
ALL DISC S
* When only one station is preset,
"ONE PRESET" appears in the display.
To
Turn off the radio
Adjust the volume
To listen to non-preset radio
stations
Press TUNING MODE repeatedly in step 2
until "MANUAL" appears, then press
TUNING +/– to tune in the desired station.
18
Frequency
MHz
Do this
Press ?/1.
Turn VOLUME (or press
VOL +/– on the remote).
Tips
• Pressing TUNER/BAND while the system power
is off automatically turns on the system and tunes
in the last received station (One Touch Play).
• You can switch from another source to the radio
by pressing TUNER/BAND (Automatic Source
Selection).
• If an FM program is noisy, press STEREO/
MONO so that "MONO" appears in the display.
There will be no stereo effect, but the reception
will improve. Press this button again to restore the
stereo effect.
• To improve broadcast reception, move the
supplied antennas.
DOLBY NR
OFF
VOLUME
PRESET