Sony LBT-LV100AV Operating Instructions Manual page 14

Playing a VIDEO CD (continued)
To
Stop playback
Pause
Select a track
Find a point
in a track or
scene
(Lock Search
function)
Select a
VIDEO CD in
stop mode
Play only the
VIDEO CD
you have
selected
Play all
3
VIDEO CDs*
Remove or
change the
VIDEO CDs
Adjust the
volume
1
* There may be some disturbance in the paused
video image.
* 2 Only for VIDEO CDs without PBC functions (Ver.
1.1).
* 3 This function cannot be used during playback of a
VIDEO CD with the PBC functions (Ver. 2.0).
14
Do this
Press x.
Press HX (or X on the
1
remote)* . Press HX again to
resume playback (or CD N on
the remote).
Press NEXT to go forward, PREV
to go back.
Or, during play or pause, turn the
jog dial clockwise (to go forward)
or counterclockwise (to go
backward) and release it when
you reach the desired track. (Or
press > (to go forward) or .
(to go backward) on the
2
remote.)*
Press M or m during
playback.
1 Press once to start searching.
2 Press again to increase the
search speed. Each time you
press the button, the speed
changes as follows:
1(slow) t 2 (normal) t
3 (high) t 1(slow)...
3 Press HX at the desired
point to stop searching.
Press one of the DISC 1 - DISC 5
buttons (or DISC SKIP).
Press PLAY MODE repeatedly
until "1 DISC" appears.
Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Press PUSH OPEN.
Turn VOLUME (or press
VOL +/– on the remote).
Tips
• Pressing HX while the system power is off
automatically turns on the system and starts
VIDEO CD playback if there is a VIDEO CD on
the tray (One Touch Play).
• You can switch from another source and begin
playing a VIDEO CD just by pressing HX, one of
the DISC 1 - DISC 5 buttons, or CD N on the
remote (Automatic Source Selection).
• If there is no VIDEO CD in the player, "NO DISC"
appears in the display.
• You can change the VIDEO CD which is in the
loading position during playback of the VIDEO
CD which is in the playing position.