Sony LBT-LV100AV Operating Instructions Manual page 5

1
Connect the speakers.
1 Connecting the front speakers
Connect the speaker cords to the
FRONT SPEAKER jacks.
2 Connecting the center speaker
Connect the speaker cords to the
SURROUND SPEAKER CENTER
jacks.
3 Connecting the rear speakers
Connect the speaker cords to the
SURROUND SPEAKER REAR jacks.
Black/Stripe
(#)
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• Insert only the stripped portion of the cord.
Inserting the vinyl portion will interfere with the
speaker connection and no sound will come from
the speaker.
Red (3)
Black (#)
Black/Stripe Red/Solid
(#) (3)
Red/Solid
(3)
2
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Extend the FM wire
antenna horizontally.
AM loop antenna
3
Connect the video input jack of
your TV to the VIDEO OUT jack of
this system using the supplied
video connecting cable.
When using a TV
Turn on the TV and select the video input to view
pictures from this system.
Tip
When your TV has an S VIDEO jack, for the best
picture quality, you can use an optional S VIDEO
cable to connect it to the S VIDEO OUT jack on the
rear panel of this system. Note that the input signal
from the VIDEO1 and VIDEO2 INPUT jacks do not
output via the S VIDEO OUT jack.
4
Set SYSTEM SELECT (color system)
to the appropriate position (PAL or
NTSC), according to your TV.
PAL
AUTO
NTSC
SYSTEM
SELECT
continued
5