Installer Section; Receiving Shipment; Moving & Handling Precautions - Heat Siphon Z Series Owner's Manual

HEAT SIPHON
This Section of the manual applies to the installer.

1 Receiving Shipment

NOTICE: ALL Shipments by the factory are made F.O.B.. Latrobe, PA. As
such, the buyer (dealer) takes possession of the Heat Siphon® the minute
it leaves the factory loading dock.
United States ThermoAmp, Inc. is NOT responsible for any shipping
damage occurring in transit. THE FREIGHT HAULER IS RESPONSI-
BLE FOR ALL FREIGHT DAMAGE AND ALL DAMAGE CLAIMS MUST
BE SETTLED DIRECTLY WITH THE FREIGHT HAULER. The factory will
assist you in settling claims wherever possible but YOU MUST DEAL
DIRECTLY WITH THE SHIPPER TO RESOLVE ALL FREIGHT DAMAGE.
IMPORTANT.- IF YOU RECEIVE A DAMAGED HEAT SIPHON® NOTIFY
THE CARRIER IMMEDIATELY (THAT MEANS THE CARRIER'S OFFICE,
NOT THE DRIVER)
CAUTION: A unit which has been dropped will have internal damage
which is not apparent from the outside of the carton. If in doubt
unpack the unit in presence of the shipper at the time of delivery.
Puncture marks and oil stains on the box are indicative of a ruptured
and leaking sealed refrigeration system. AND SHIPMENT SHOULD BE
REFUSED.
Heat Siphon® is designed and packaged to ensure safe arrival even with individual shipments, however, if Heat
Siphon® is tailgated or dropped, the damage may not be visible from outside the box and if you accept shipment
from the trucking company, any subsequent claims of concealed damage will be refused by the freight hauler.
Although unattractive, minor dents in the aluminum evaporator fins won't adversely affect Heat Siphon®
performance, we suggest that you make note of ANY damages on the Bill of Lading BEFORE signing for receipt.
Damaged fins can be "combed" straight, if not severely smashed, with a "fin comb" commonly carried by most
refrigeration repairmen. Black acrylic enamel spray paint can also be used to repair any cosmetic damage.
1.1 Moving & Handling Precautions
If only a few simple handling rules are followed, Heat Siphon® can be moved virtually anywhere with no problems:
1. DO NOT DROP OR TAILGATE THE HEAT SIPHON .
2. DO NOT LAY THE UNIT ON ITS SIDE OR UPSIDE DOWN.

Installer Section

®
Installer Section
Installer - 15