Formax FD 452 Operator's Manual

Envelope opener

Advertisement

FD 452
Envelope Opener
Operator Manual
First Edition
3/2011

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FD 452 and is the answer not in the manual?

Questions and answers

Summary of Contents for Formax FD 452

  • Page 1 FD 452 Envelope Opener Operator Manual First Edition 3/2011...
  • Page 2: Specifications

    Overview Power Cable Pressure Arm Extension Arm Base Unit On/Off Switch Catch Tray Transport Rollers Specifications Speed Up to 300 envelopes per minute 5.5” – 13” H x 3.5” – 10.2” W Envelope Sizes Envelope Thickness Up to 4 mm 33”...
  • Page 3 Running a Job Switch on the letter opener (I/O switch on rear side of unit). Sort out any unsuitable pieces, i.e. plastic bags and letters that are thicker than 4mm, or made from synthetic materials. Tap the stack of letters (address field facing you and flap facing up) on a flat surface several times in order to line up the lower edges.
  • Page 4: Troubleshooting

    Connect the letter opener to a grounded single-phase power outlet. Do not remove any parts. All maintenance and repair must be done by an authorized Formax service technician. Failure to observe this rule will void your warranty. Do not use water or benzene to clean your letter opener.

Table of Contents