HanleyLED Concorde Cabinet System Installation Manual page 4

Concorde Cabinet System Quick Assembly
Step 1
Order the size light bar just as you would order your replacement florescent
lamps. Pick the size you want. Everything you'll need to assemble the bar will be
in the box. This guide shows how to assemble a 96" Concorde LED Bar System.
Step 3
Connect all your Concorde pieces by using the Concorde Connector Joints.
Tighten the watertight wire ports.
** Pay attention to the male and female ends when assembling.
Input
Step 2
Make sure you have all your pieces for assembly. Take all the Concorde
components out of the box.
Step 4
Place your Concorde Retrofit (RF) Connectors on each side of the bar. The RF Connectors mount
straight into the HO sockets of your existing cabinet making this an easy retrofit install. Screw
in Watertight End Cap to the unused wire port.
Output
Installation Guide | www.hanleyledsolutions.com | 800.542.9941
For new construction, the Conorde Speed
Spring brackets are available for purchase
4