Recording Onto A Tape; Sound Mixing - Sony DHC-AZ33D Operating Instructions Manual

Recording onto a tape
There are three ways to record on a TYPE
I (normal) tape. Use the buttons on the
unit for the operation.
CD Synchro Recording
You can record an entire VIDEO CD or
AUDIO CD onto a tape. The recording
level is adjusted automatically.
Manual Recording
You can record just the portion you
want from a sound source, including
connected audio components.

Sound Mixing

You can "mix" sound from any one of the
sound sources and singing or speaking
into a microphone (not supplied). The
mixed sound can be recorded onto a tape.
1
Load a recordable tape into the
tape deck, then touch TAPE
to select "TAPE. "
2
Press DIRECTION
to select "" to record on one
side. Select "" or "" to
record on both sides.
7
GB


repeatedly
3
Touch 
to select recording side, then
touch  
.
If you select both sides recording or
front side recording, touch 

repeatedly to light up the 
indicator, then touch 
record on the reverse side, touch


repeatedly to light up the
 indicator, then touch 
4
Prepare the recording source.
For CD Synchro Recording:

Touch DVD and insert the disc
you want to record. When the system
automatically starts playback, touch
 
twice to cancel resume play.
For Manual Recording and Sound
Mixing:
Select the desired source to record
or mix.
To record only sound from a
microphone, touch DVD
not start playing any other source in
step 6.

repeatedly

. If you

.

, and do