Optional components
There is no sound.
Refer to General item "There is no
sound. " (page 109) and check the
condition of the system.
Connect the component properly (page
103) while checking:
if the cords are connected properly.
if the cord plugs are firmly inserted
all the way.
Turn on the connected component.
Refer to the operating instructions
supplied with the connected
component and start playing.
If the system still does not operate
properly after performing the
above measures or other troubles
not described above occur, reset the
system as follows:
Use buttons on the unit to reset the
system to its factory default settings.
1
Unplug the power cord.
2
Plug the power cord back in.
3
Press
to turn on the system.
4
While holding down DISPLAY
touch
and press
same time.
"COLD RESET" appears in the display.
The system is reset to the factory
settings except for DVD settings. You
should set the settings you made, such
as the preset stations, clock and timer.
To return the DVD setup to the default
settings*, perform reset as follows:
1
Press
is stopped.
The Control Menu appears on the TV
screen.
2
Press or
3
Press or
"RESET, " then press ENTER
4
Press or
"YES, " then press ENTER
It takes a few seconds to complete. Do
not press
system.
* Except for Parental Control settings
,
at the
DISPLAY
when playback
repeatedly to select
(SETUP), then press ENTER
.
repeatedly to select
repeatedly to select
when resetting the
Continued
.
.
11
GB