Speaker Settings - Sony DHC-AZ33D Operating Instructions Manual

3
Hang the speakers on the screws.
Notes
 Use screws that are suitable for the wall
material and strength. As a plaster board wall
is especially fragile, attach the screws securely
to a beam and fasten them to the wall. Install
the surround speakers on a vertical and flat
wall where reinforcement is applied.
 Contact a screw shop or installer regarding
the wall material or screws to be used.
 Sony is not responsible for accident or
damage caused by improper installation,
insufficient wall strength or improper screw
installation, natural calamity, etc.

GB
Hole on the back of
the speaker
5.3 mm
9 mm
Speaker settings
To enjoy DVD VIDEOs and other discs
with multichannel sound and Dolby
surround effects, the speakers need to
be adjusted. Set the distance from the
listening position to the speakers, and the
balance and level. Then use the test tone
to adjust the volume of each speaker to
the same level.
For details, see "Setting the speakers"
(page 68).