Recording Onto A Tape (Except For Latin American Models) - Sony MHC-GZR999DA Operating Instructions Manual

Recording onto a
tape (except for Latin
American models)
There are three ways to record on a TYPE
I (normal) tape.
Use the buttons on the unit for the
operation.
The recording level is adjusted
automatically.
CD Synchro Recording
You can record an entire VIDEO CD,
AUDIO CD, or DATA CD/DVD (MP3
files only) onto a tape.
Manual Recording
You can record just the portion you
want from a sound source, including
connected audio components.
Sound Mixing
You can "mix" sound from any one of the
sound sources and singing or speaking
into a microphone. The mixed sound can
be recorded onto a tape.
1
Insert a recordable tape into the
casette holder with the side you
want to record facing up.
70
GB
2
Prepare the recording source.
For CD Synchro Recording:
Press DVD and load the disc you
want to record. If you have already
loaded the disc, press DISC 1 
DISC 3 to select the disc. When the
system automatically starts playback,
press  twice to cancel resume
playback.
For Manual Recording and Sound
Mixing:
Select the desired source to record
or mix.
If you record a disc manually, start
playing the disc first, then perform
steps 3 and 4. To record only your
favorite CD tracks, perform steps 1
to 6 of "Creating your own program
(Program Play)" (page 53).
To record only sound from a
microphone, connect a microphone
and then press USB to select "USB"
function. Make sure not to start
playing the USB device in step 4.