Cooling Only/Cooling And Heating Selection Operations; Auxiliary Heater Operations (Reserved) - Sinclair SDV5 Installation & Owner's Manual

Operating the Remote Controller
5.12 Cooling Only/Cooling and Heating Selection
Operations
C/H
1) In Cooling Only mode, press to turn on the Cooling and Heating
function. (see Figure 3.18)
Figure 3.18
C/H
2) In Cooling and Heating mode, press to turn on the Cooling Only
function.
Note:
• Factory default setting is Cooling and Heating mode.

5.13 Auxiliary Heater Operations (reserved)

19