Fan Speed Operations - Sinclair SDV5 Installation & Owner's Manual

Operating the Remote Controller
2) Press each time to change the operating mode according to the
order shown in Figure 3.5;
Auto
3) In Auto, Cool, Dry or Heat mode, press
temperature setting. Press
1°C (default). Long press to change the temperature continuously.
Note:
• Fan speed cannot be adjusted in the Auto and Dry modes.
• Temperature setting cannot be adjusted in the Fan mode.

5.3 Fan Speed Operations

In Cool, Heat or Fan mode, press
(see Figure 3.6).
1) 7 fan speeds: The default in the remote controller is the mode with 7
fan speeds, where the Fan Speed will be adjusted in turn as shown in
Figure 3.7;
Auto
Auto
Speed 1
2) 3 fan speeds: Fan Speed will be adjusted in turn as shown in Figure
3.8.
Note: the default fan speed is 7 fan speeds, please refer to Field
Setting to adjust the default fan speed.
13
Cool
Speed 2
Speed 3
Auto
Auto
Heat
Figure 3.5
and to adjust the temperature by
to set the operating fan speed
Figure 3.6
Speed 4
Speed 5
Figure 3.7
Low Mid
Figure 3.8
Dry Fan
and to adjust the
Speed 6
High
High
Speed 7