Silent Mode Operations; Eco Operations; Timer On/Off Operations - Sinclair SDV5 Installation & Owner's Manual

Full dc inverter systems

Hide thumbs Also See for SDV5:

Table of Contents

Operating the Remote Controller

The remote controller can send the ECO signal to the indoor unit

when the unit is operating in Cool or Heat mode.

1) Press

(see Figure 3.13) to send the ECO signal to the indoor

unit. The

icon is displayed;

2) Then press

to exit the ECO function. The

icon disappears.

Figure 3.13

Note:

• In cooling mode, when ECO is set up, the Fan Speed is turned to

Auto and the temperature is 26°C; in heating mode, when ECO is set

up, the Fan Speed is turned to Auto and the temperature does not

change.

• Once it has been running for 8 hours,

will no longer light up, and

the unit will exit the ECO mode.

• The Silent and ECO functions cannot be implemented at the same time.

"Timer" is used to set the timed on/off state of indoor unit.

1) Timer On Operation:

① Press

(see Figure 3.14), and the remote controller will display

"Timer On", and "0.0h Later On" will appear in the timer area. Adjust

the Timer On settings now;

Figure 3.14

Table of Contents