Setting Operations; Lock Buttons Operations - Sinclair SDV5 Installation & Owner's Manual

Operating the Remote Controller

5.10 Setting Operations

SET
Press to configure the remote controller parameters (see Figure
3.16) (for details, refer to the parameter configuration methods in Field
Settings).

5.11 Lock Buttons Operations

Once the buttons on the remote controller are locked, all the other
button operations are invalid except for Lock, Cooling Only/Cooling
and Heating Selection and Group Address Setting.
LOCK
1) Press
will show the lock icon "
LOCK
2) Press
are unlocked.
to lock the buttons (see Figure 3.17) and the display
".
again, and the lock icon "
Figure 3.16
Figure 3.17
" will disappear. Buttons
18