Inspect The Drain Tubing - Curtis Chill-X User Manual

CLEANING INSTRUCTIONS - CBFX
Preventive Maintenance (cont.)
Remove the Mixing Bowls and Lids
5 Remove the handle assemblies from
the bowl taps by pushing in on the
top of the handle with your thumb
while pulling up on the bottom with
6 Lift off the lids.
7 Remove the bowl by pushing the
front up and pulling outward on the
trim on the bottom.
8 Pull the bowl seal off of the back of
each bowl.
9 Pull forward on each auger to
remove it from the drum. Remove
and discard the auger seals from the
front of each drum.

Inspect the Drain Tubing

10 Disconnect the power cord from the
electrical outlet.
11 Remove both side panels, the rear
panel and the drip trays from the
unit.
12 Inspect the two plastic tubes behind
the front panel for clogs. They run
from the evaporator drip pan down
to the drip trays. Insert the brush
included with the unit into the (2)
holes in the top of the evaporator
drip pan to clear any clogs.
CFBX, CLEANING INSTRUCTIONS
Auger
continued...
5
Pull outward
here
7
Auger
seal
9
11
CI34
6
Bowl
seal
8
10
Brush
Plastic
tubes
12
082619J