Reassemble The Unit; Rinse Out The Drain Tubing - Curtis Chill-X User Manual

CLEANING INSTRUCTIONS - CBFX
Daily Cleaning (cont.)

Rinse Out the Drain Tubing

17 Reinstall the drip trays. Position the
drain hose in the opening in the top
of each drip tray. Then, insert the tabs
on the back of the tray into the holes
on the front of the chassis. Push down
gently to secure in place.
18 With the empty drip trays in place,
pour 16 oz./500 ml of warm water
(100-120°F/40-50°C) into the front of
left side, then the right side.
19
insert the brush included with the
unit into the (2) holes in the top of
the evaporator drip pan to clear any
clogs in the tubing that runs down to
the drip trays.
20
Remove and empty the drip trays.

Reassemble the Unit

21 *If removed, install an auger seal on
each drum.
22 Reinstall the augers. Rotate each
auger until it engages completely.
23 Lubricate the inner surface on each
bowl seal with food grade lubricant
(Curtis Part # WC-4916). Install a bowl
seal on the back of each bowl.
NOTICE: Failure to lubricate
seals may result in leaks.
24 Set the mixing bowls back in place.
Make sure that the lip on the bottom
of each bowl rests inside the front trim
on the top of the chassis.
CFBX, CLEANING INSTRUCTIONS
Auger
seal*
continued...
17
Brush
Tubing
19
21
Bowl
seal
23
CI34
H 0
2
100°F
Left
Right
Auger
18
20
22
24
082619J