Preventive Maintenance - (Perform Every Six Months); Seal And Bushing Replacement Procedure; Ci34 - Curtis Chill-X User Manual

CLEANING INSTRUCTIONS - CBFX

Preventive Maintenance - (Perform Every Six Months)

perform seal and bushing replacement. Press any button on the control panel to temporarily clear the display. The
technician will reset the MAINTENANCE reminder during the procedure.
WARNING • Failure to perform preventive maintenance as required, may result in leaks and/or damage
to the unit. Damage and/or leaks resulting from failure to perform required maintenance is
not covered by the warranty.
•
• To avoid personal injury, disconnect the power cord before performing preventive
maintenance.
Seal and Bushing Replacement Procedure (All Kits and Parts Sold Separately)
WC-100216 - Auger seal
Kit # WC-100235
1
Replace every 6 months, or as needed. Use kit # WC-100235 (2 sets per kit).
2
Replace once a year, or as needed. Use kit # WC-100236 (2 sets per kit).
Also required: Curtis Part # WC-4916, food grade lubricant.
Empty the Bowls
Skip to step 5 if the bowls are empty.
1 Make sure that the main power
switch is ON.
2 Push the operating mode buttons
repeatedly for each bowl until MIX
appears on the display.
3 Place a large empty container
under each dispenser tap. Drain the
contents out of each bowl. Hold the
container up to the tap to reduce
splashing.
4 Once the bowls are empty, turn OFF
the main power switch.
CFBX, CLEANING INSTRUCTIONS
WC-100234 - Drum bushing
1
Kit # WC-100236
WC-100010 - Tap seal
2
1
3

CI34

WC-100253 - Bowl seal
F F
40º 40º
MIX MIX
2
4
082619J