Specifications - Sony CMT-SE9 Operating Instructions Manual

Guide to the Serial Copy Management
System
Digital audio components, such as CDs, MDs, and
DATs let you copy music easily with high quality by
processing music as a digital signal.
To protect the copyrighted music programs, this
system uses the Serial Copy Management System that
allows you to make only a single copy of a digitally
recorded source through digital-to-digital connections.
You can make only a first generation copy*
through a digital-to-digital connection.
For example:
1
You can make a copy of a commercially
available digital sound program (for example, a
CD or MD), but you cannot make a second
copy from the first-generation copy.
2
You can make a copy of a digital signal from a
digitally recorded analog sound program (for
example, an analog record or a music cassette
tape) or from a digital satellite broadcast
program, but you cannot make a second copy.
* A first-generation copy means a digital recording of
a digital signal made on digital audio equipment. For
example, if you record from this system's DVD
player to the MD deck, you make a first-generation
copy.

Specifications

DVD player/Tuner (HCD-SE9)
Amplifier section
DIN power output (rated): 20 + 20 W
Continuous RMS power output (reference)
Front speaker:
Center speaker:
Surround speaker:
Subwoofer:
Music power output (reference):
Inputs
MD/TAPE IN (phono jack):
VIDEO/SAT IN (phono jacks):
VIDEO/SAT IN VIDEO (phono jack):
MD DIGITAL IN OPTICAL:
VIDEO/SAT DIGITAL IN OPTICAL:
(6 ohms at 1 kHz, DIN)
25 + 25 watts
(6 ohms at 1 kHz, 10%
THD)
25 watts
(8 ohms at 1 kHz, 10%
THD)
25 + 25 watts
(6 ohms at 1 kHz, 10%
THD)
50 watts
(3 ohms at 1 kHz, 10%
THD)
40 + 40 W
Voltage 250 mV,
impedance 47 kilohms
Voltage 450/250 mV,
impedance 47 kilohms
1 Vp-p, 75 ohms
Supported sampling
frequencies: 32 kHz,
44.1 kHz and 48 kHz
Supported sampling
frequencies: 32 kHz,
44.1 kHz and 48 kHz
continued
GB
99